Ø Automatic channel and power optimization
The AP 6532’s SMART RF feature automatically optimizes power and channel selection so each user gets always-on high-quality access and mobility.
ØGap-free security
Includes layer 2-7 stateful packet filtering firewall, AAA RADIUS services, Wireless IPS-lite, VPN gateway, and location-based access control. Users can also add role-based access control and AirDefense Wireless IPS and rogue detection for premium-level security vigilance.
ØFull performance using standard POE
The AP 6532 is designed to provide full 802.11n performance using standard and lower cost POE 802.1 (af).
ØDevice mobility
Supports fast secure roaming at Layer 2 and Layer 3. In addition, the network optimizes mobile performance with load balancing, pre-emptive roaming and rate scaling.
ØGreater coverage per AP
The powerful 24 dBm radio increases coverage, performance and obstruction penetration versus 23 dBm radios. In addition, receiver sensitivity has been increased proportionally so users have and increased ability to maintain high-performance access.
ØDevice and network acceleration
Device and network performance can be accelerated through a virtual LAN feature via the switch/controller. Each access point can be virtualized into four unique VLANs, which can be customized to direct broadcast traffic to the intended recipient. This reduces overall network traffic while improving device performance and battery life up to 25%. This also reduces the overall number of access points required to provide unique device services.
ØEasy deployment and maintenance
Requires no configuration or manual firmware maintenance. The Motorola wireless controller discovers access points on the network and automatically downloads all configuration parameters and firmware, greatly reducing installation, maintenance and troubleshooting costs for Layer 2 and Layer e deployments.
ØMultiband operation
Allows concurrent sensing on 2.4 GHz and 5.0 GHz frequency bands for multiband intrusion protection or troubleshooting.
ØApplication support
Supports Call Admission Control for optimized VoWLAN performance, as well as video streaming and data throughput for 802.11a/b/g/n clients.
ØElectrical Safety
UL 60950, cUL, EU EN 60950, TUV and UL 2043 (external antenna)
ØPower Specification
Integrated power over ethernet support: Standards-based IEEE 802.3af
Operating current: 270mA (typical)
Operating voltage: 802.3af supply: 48 VDC @ 12.95W (typical), 36 VDC to 57 VDC (range)
ØUser Environment
Electrostatic discharge: +/- 15 kV (Air), +/- 8 kV (contact)
Storage altitude: 15, 000 ft./4572 m
Operating altitude: 8, 000 ft./2438 m
Operating humidity: 5%-95% (non-condensing)
Storage temperature: -40°F to 158° F/-40°C to 70° C
Operating temperature: 32°F to 122° F/0°C to 50° C
ØRadio Specifications And Networking
Maximum transmit power settings：24dBm
Operating channels：5GHz: All channels from 4920 MHz to 5825 MHz 2.4GHz: Chan 1-13 (2412-2427 MHz), Chan 14 (2484 MHz) Japan only Actual operating frequencies depend on national regulatory limits
Uplink：Auto-sensing 10/100/1000Base-T Ethernet
Wireless medium：Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Division Multiplexing (OFDM), and Spatial Multiplexing (MIMO)
Network standards：802.11a、802.11b、802.11g、802.11n - EU
Data rates supported：802.11b/g：1、2、5.5、11、6、9、12、18、24、36、48 及 54 Mbps；802.11a：6、9、12、18、24、36、48 and 54 Mbps；802.11n：MCS 0-15 up to 300 Mbps
ØPhysical Characteristics
LEDs：2 LED indicators with multiple modes indicating 2.4GHz/5 GHz Activity, Power, Adoption and Errors
Available mount configurations
Internal Antenna: Ceiling-mount (to suspended ceiling T-bars, below tile); wall mount
External Antenna: Ceiling-mount (above tile); wall-mount
Weight
Internal Antenna: 2.0 lbs/.91 kg
External Antenna: 2.5 lbs/1.14 kg
Dimensions (HxWxD)
Internal Antenna: 9.5 in. L x 7.5 in. W x 1.7 in. H (24.13 cm L x 18.916 cm W x 4.36cm H)
External Antenna: 8.5 in. L x 5.6 in. W x 1.5 in. H (21.64 cm L x 14.10 cm W x 3.771 cm H)