The AP 6521 is a versatile access point with the cost-efficiency of a single radio. With its WiNG 5 intelligence, this access point offers higher throughput along with direct forwarding, security, QoS services and site survivability.
Automatic channel and power optimization
The SMART RF feature automatically optimizes power and channel selection so each user gets always-on high-quality access and mobility.
High reliability
Optimizes network availability through its central and pre-emptive intelligence, which dynamically senses weak or failing signals, securely moves user to alternate APs, and boosts signal power to ensure uninterrupted mobile user access.
Gap-free security
Includes layer 2-7 stateful packet filtering firewall, AAA RADIUS services, Wireless IPS-lite, VPN gateway, and location-based access control.
Fast and easy deployment
Requires no configuration or manual firmware maintenance. The Motorola wireless controller discovers access points on the network and automatically downloads all configuration parameters and firmware, greatly reducing installation, maintenance and troubleshooting costs for Layer 2 and Layer 3 deployments.
Device and network acceleration
Device and network performance can be accelerated through a virtual LAN feature via the switch/controller. Each AP 6521 access point can be virtualized into four unique VLANs, which can be customized to direct broadcast traffic to the intended recipient. This reduces overall network traffic while improving device performance and battery life up to 25%. This also reduces the overall number of access points required to provide unique device services.
Full 802.11n performance with standard 802.3af
Simplifies and reduces total cost of installation using standard Power-over-Ethernet (PoE).
Mobility
Supports fast, secure roaming.
Security
This unique multi-purpose device can execute and enforce the IDS/IPS security policies configured in the Motorola wireless switch, and can also be utilized as a 24x7 dedicated sensor with Wireless IPS from AirDefense.
Application support
Supports Call Admission Control for optimized VoWLAN performance, as well as video streaming and data throughput for 802.11a/b/g/n clients.
ØElectrical Safety
UL 60950, cUL, EU EN 60950, TUV and UL 2043 (external antenna)
ØPower Specification
Integrated power over ethernet support: Standards-based IEEE 802.3af
Operating current: 270mA rms at 48V
Operating voltage: 802.3af supply: 48 VDC @ 12.95W (typical), 36 VDC to 57 VDC (range)
ØUser Environment
Electrostatic discharge: +/- 15 kV (Air), +/- 8 kV (contact)
Storage altitude: 15, 000 ft.(4572 m)
Operating altitude: 8, 000 ft./2438 m
Operating humidity: 5%-95% (non-condensing)
Storage temperature: -40°F to 158° F/-40°C to 70° C
Operating temperature: 32°F to 104° F/0°C to 40° C
ØRadio Specifications And Networking
Maximum transmit power settings：27dBm
Operating channels：
5GHz: All channels from 4920 MHz to 5825 MHz
2.4GHz: Chan 1-13 (2412-2427 MHz), Chan 14 (2484 MHz) Japan only
Actual operating frequencies depend on national regulatory limits
Uplink：Auto-sensing 10/100/1000Base-T Ethernet
Wireless medium：Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Division Multiplexing (OFDM), and Spatial Multiplexing (MIMO)
Network standards：802.11a、802.11b、802.11g、802.11n - EU
Data rates supported：802.11b/g: 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, and 54Mbps; 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54Mbps; 802.11n: MCS 0-15 up to 300Mbps
ØPhysical Characteristics
LEDs：2 LED indicators with multiple modes indicating 2.4GHz/5 GHz Activity, Power, Adoption and Errors
Available mount configurations
nternal antenna: Ceiling-mount (to suspended ceiling T-bars, below tile); wall mount
External antenna: Ceiling-mount (above tile); wall-mount
Weight
Internal Antenna: 2.0 lbs/.91 kg
External Antenna: 2.5 lbs/1.14 kg
Dimensions (HxWxD)
Internal Antenna: 6.0 in. L x 5.5 in. W x 1.63 in. H (15.24 cm L x 13.97 cm W x 4.11 cm H)
External antenna: 6.0 in. L x 5.5 in. W x 1.63 in. H (15.24 cm L x 13.97 cm W x 4.11 cm H)