WCS-02R is an advanced solution for Citywide Wifi / Wireless Coverage, Wireless Mesh Network, and Wireless Backhaul, which operates in IEEE802.11a 5GHz and IEEE802.11b/g 2.4GHz frequency band simultaneously.
This series provides significant performance in terms of ranges, throughput, co-channel interference mitigation with its superior patent software techniques. This enables service provider to offer highly cost effective Citywide Wireless Coverage, Wireless Mesh Network, and Wireless Backhaul by "Daisy Chain" topology without compromising quality.
By taking advantage of "Daisy Chain" features, this series provides the "Daisy Chain Mesh" application. DC-Mesh is a more practical idea in Mesh application, and gets rid of the WiFi Mesh disadvantage, like long latency, up to 30% to 50% throughput drop.
To maximum the performance, WCS-02R / WCS-03R support two radios modes. Both radios are combined to operate as a single unit that provides a double bandwidth of a single radio equivalent. This is ideal for bandwidth-intensive application such as video surveillance, resulting in crystal clear video images. This mode also provides a "fat pipe" for point to point wireless backhaul. Both radios is capable of the applications, like Load Balance, Fail Over and one way transmit (TX, and RX separated in different radios) to enhance the performance of system in Citywide Wireless Coverage, Wireless Mesh Network, and Wireless Backhaul.
To conclude, WCS series is the best choice for the Wireless Coverage, Wireless Mesh Network, and Wireless Backhaul. It will offer you the biggest CP ratio and totally ease WISP / SI's cost on implementation and maintenance.
Technique scope:
Wimax, Wifi ,wireless backhaul, mobile live video, Wireless Mobility, Wireless Surveillance, Wireless Video, outdoor ap, long range, high capacity, licensed band, NOLS technology, IEEE 802.11 abgn, outdoor wireless antenna, licensed band antenna, Wireless Outdoor Bridge, Outdoor Bridge, Wireless Bridge, Digital microwave radio, Long Range Wireless Outdoor AP/ Bridge/ CPE, Outdoor Wireless Access Point, Point-to-Point (PtP) / Point-to-Multipoint (PtMP) bridging, Wireless broadband, IP68 weatherproof casing, MMDS, PDH, SDH, STM1, STM-1
Low Latency and High Throughput over Multiple Hops
Daisy chained wireless Hot Zones
Low latency and high throughput upon multiple wireless hops
Reliable performance when deploying multiple nodes in bridged
or routed environments.
Bandwidth control module at subscriber level
Comprehensive Security Features
WPA with TKIP/AES support
802.1x EAP support (Client and Server modes)
64/128/152 bits Dynamic WEP keys
Radius client
Hide ESSID
MAC address filtering
NAT
Dynamic WAN Interface Configuration
Flexible assignments of any wired or wireless interfaces as WAN
links to adapt to different network topologies
Bandwidth aggregation by logically combining multiple RF links
to achieve super trunk mode for high bandwidth deployments
Smart traffic load balancing across multiple RF links
Configurable Transmit-only and Receive-only mode per RF interface
1+1 and N+1 interface protection schemes that meets high availability
carrier grade deployments
Flexible wireless network distribution system
Harsh Outdoor Environments to Keep Operation
Certified IP68 sturdy water-tight housing
Built-in automatic thermal sensor and regulator module to
facilitate deployment in cold regions
PoE module
System Management
Firmware upgrade through TFTP, FTP
Interface status display
SSH Telnet
Syslog
SNMP v1/v2
Easy Configuration backup
Simple Installation and Deployment
Software Alignment / Deployment Tools
User Friendly Device Management Utility
Backup the Configuration
Restore the Configuration
Firmware Upgrade
Back to Factory Default / Reboot
Batch operation for above items