WAP-1954NP IEEE802.11bgn High Power Indoor In-wall Wireless AP with Giga IEEE802.3af POE and 10/100 Front LAN port is designed to fit into a wall, and bring the benefits of both a RJ-45 wired connection as well as WiFi wireless connection.
The WAP-1954NP can be installed and configured easily into any new wireless network or integrated within an existing wired network resulting in a more flexible and cost-effective wireless deployment. And, a network administrator can centrally manage the WAP-1954NP via a Web browser or an SNMP MIB browser or Network Access Gateway / Controller WMS-308N or Wireless Switch WSW-1808A. With built-in IEEE802.3af POE Ethernet port, power and data are supplied to the unit using CAT5 Ethernet cable from Central IEEE802.3af POE Switch.
While integrating with Network Access Gateway / Controller WMS-308N or Wireless Switch WSW-1808A, WAP-1954NP is a best IEEE802.11bgn Indoor Inwall Wireless AP for Public Wifi User Service Management in the Hotel, Hostel, Hospital, etc places.
Technique scope:
Wireless hotspot gateway, Wireless Gateway ,Hotspot Gateway, Visitor Access Gateway, Wireless coverage, Network access control, Indoor ap, in wall ap, in-wall access point, ceiling ap, Ceiling access point, Indoor Wireless Access Point, Secure WLAN Controller, Secure Wireless Office Controller, Enterprise Access Point, access point, managed access point, wireless AP, 802 11, Wireless Mesh Network, Wireless Mesh, Wireless network security,Wireless Management, AM Management WLAN Switch, Management Access Controller, Intelligent Device Server, Intelligent Wireless Switch, Internet Usage Monitor, Internet Monitor, Employee internet monitor, Unified Threat Management, SSL VPN, Firewall VPN, Network Security, Network Management Systems
General Features
ØA compact AP fits for any size of Ethernet wall jack
ØSupports Gigabit Ethernet port
ØSupports standard IEEE802.3af POE
ØUse existing Ethernet cabling system, no re-wiring
ØInvisible and could blend with all interior decoration
Wireless Features
ØIEEE802.11h Transmission Power Control
ØChannel Selection: Manual or Auto
ØNo of BSSID (VAP): 8
ØNo. of max WDS setting: 4
ØPreamble setting : Short/Long
ØSetting for transmission speed
ØDynamic wireless re-transmission
System Administration
ØWeb-based management UI
ØRemote firmware upgrade by Web GUI
ØConsole management
ØBackup and restore the system configuration
ØSupport SNMP v2c, v3, MIBII
ØSNMP Traps to a list of IP number
ØSupport Telnet, SSH, Command Line Interface (CLI)
ØRemote Link Test-Display connect statistics
Central AP management supported while working with WMS-308N or WSW-1808A
ØAuto discovery for managed APs
ØAP-Automatic configuration and provisioning
ØAP Profile Management
ØAP Batch Setup (IP address, Wireless Security, VAP, System Info / Password / Management Method, Time Server, Channel / Output Power / Band / Country Code, Firmware update by TFTP or URL, etc.)
ØAP Group Setup (Dynamic Channel Allocation, Maximum Client Control, MAC Filter Control,
MAP)
ØAP Group Status (IP address, FW version, Online user, RSSI, TX/RX bandwidth, Device Syslog)