Beijing Huaxun Widata Electronics Technology Co., Ltd. -Products & Technology

WAP-1954NP-C IEEE802.11bgn High Power Indoor Ceilng Wireless AP with IEEE802.3af POE is designed to fit into the Ceiling, and bring WiFi wireless connection.

The WAP-1954NP-C can be installed and configured easily into any new wireless network or integrated within an existing wired network resulting in a more flexible and cost-effective wireless deployment. And, a network administrator can centrally manage the WAP-1954NP-C via a Web browser or an SNMP MIB browser or PheeNet’s Network Access Gateway / Controller WMS-308N or PheeNet’s Wireless Switch WSW-1808A. With built-in IEEE802.3af POE Ethernet port, power and data are supplied to the unit using CAT5 Ethernet cable from Central IEEE802.3af POE Switch.

While integrating with Network Access Gateway / Controller WMS-308N or Wireless Switch WSW-1808A, PheeNet WAP-1954NP-C is a best IEEE802.11bgn Indoor Ceiling Wireless AP for Public Wifi User Service Management in the Hotel, Hostel, Hospital, etc places.

Technique scope:

Wireless hotspot gateway, Wireless Gateway ,Hotspot Gateway, Visitor Access Gateway, Wireless coverage, Network access control, Indoor ap, in wall ap, in-wall access point, ceiling ap, Ceiling access point, Indoor Wireless Access Point, Secure WLAN Controller, Secure Wireless Office Controller, Enterprise Access Point, access point, managed access point, wireless AP, 802 11, Wireless Mesh Network, Wireless Mesh, Wireless network security,Wireless Management, AM Management WLAN Switch, Management Access Controller, Intelligent Device Server, Intelligent Wireless Switch, Internet Usage Monitor, Internet Monitor, Employee internet monitor, Unified Threat Management, SSL VPN, Firewall VPN, Network Security, Network Management Systems

General Features

ØSupports Gigabit Ethernet port

ØSupports standard IEEE802.3af POE

ØUse existing Ethernet cabling system, no re-wiring

Ønvisible and could blend with all interior decoration

Wireless Features

ØIEEE802.11h Transmission Power Control

ØChannel Selection: Manual or Auto

ØNo of BSSID (VAP): 8

ØNo. of max WDS setting: 4

ØPreamble setting : Short/Long

ØSetting for transmission speed

ØDynamic wireless re-transmission

System Administration

ØWeb-based management UI

ØRemote firmware upgrade by Web GUI

ØConsole management

ØBackup and restore the system configuration

ØSupport SNMP v2c, v3, MIBII

ØSNMP Traps to a list of IP number

ØSupport Telnet, SSH, Command Line Interface (CLI)

ØRemote Link Test-Display connect statistics

Central AP management supported while working with WMS-308N or WSW-1808A

ØAuto discovery for managed APs

Ø AP-Automatic configuration and provisioning

ØAP Profile Management

ØAP Batch Setup (IP address, Wireless Security, VAP, System Info / Password / Management Method, Time Server, Channel / Output Power / Band / Country Code, Firmware update by TFTP or URL, etc.)

ØAP Group Setup (Dynamic Channel Allocation, Maximum Client Control, MAC Filter Control, MAP)

ØAP Group Status (IP address, FW version, Online user, RSSI, TX/RX bandwidth, Device Syslog)

Wireless
	Standard	IEEE802.11n IEEE 802.11g IEEE 802.11b
	Frequency Band	2.412 ~ 2.484GHz
	Modulation	IEEE802.11b：DSSS (DBPK,DQPSK,CCK) IEEE802.11g：OFDM(64-QAM,16-QAM,QPSK,BPSK) IEEE 802.11n：(OFDM(64-QAM, 16-QAM, QPSK, BPSK)
	Security	WEP (64/128/152 Bit) WPA-PSK(AES+TKIP) / (802.1x , RADIUS) WPA2(PSK(AES+TKIP) / (802.1x , RADIUS) 802.1x (64/128 Bit) User Isolation Hidden SSID MAC Address Filtering (MAC ACL) IEEE802.11 mixed mode support open and shared key authentication VLAN assignment on BSSID VLAN assign to Front LAN VLAN pass through to Front LAN Network Integrity Client to Client Isolation AP to AP Isolation
	Sensitivity	11b: -90dBm@1Mbps, ±2dB -88dBm@2Mbps, ±2dB -86dBm@5.5Mbps , ±2dB -83dBm@11Mbps, ±2dB 11g: -86dBm@6Mbps, ±2dB -84dBm@9Mbps, ±2dB -82dBm@12Mbps , ±2dB -80dBm@18Mbps, ±2dB -78dBm@24Mbps, ±2dB -75dBm@36Mbps, ±2dB -72dBm@48Mbps , ±2dB -70dBm@54Mbps, ±2dB 11n: MCS HT20 HT40 0 -85dBm, ±2dB -83dBm, ±2dB 1 -83dBm, ±2dB -81dBm, ±2dB 2 -81dBm, ±2dB -79dBm, ±2dB 3 -80dBm, ±2dB -76dBm, ±2dB 4 -78dBm, ±2dB -72dBm, ±2dB 5 -74dBm, ±2dB -69dBm, ±2dB 6 -71dBm, ±2dB -65dBm, ±2dB 7 -67dBm, ±2dB -62dBm, ±2dB 8 -85dBm, ±2dB -83dBm, ±2dB 9 -83dBm, ±2dB -81dBm, ±2dB 10 -80dBm, ±2dB -78dBm, ±2dB 11 -78dBm, ±2dB -75dBm, ±2dB 12 -75dBm, ±2dB -71dBm, ±2dB 13 -71dBm, ±2dB -69dBm, ±2dB 14 -68dBm, ±2dB -64dBm, ±2dB 15 -65dBm, ±2dB -61dBm, ±2dB
	Antenna	Built-in 2dBi Omni Antenna
	EIRP	802.11b – 26±1.5dBm 802.11g – 23±1.5dBm 802.11n – 22±1.5dBm (HT20) 802.11n – 20±1.5dBm (HT40)
	Transmit Power Control	Range 1-100
	Channels	802.11b/g/n : 11 for FCC,14 for Japan,13 for Europe, 2 for Spain, 4 for France
	Operating Mode	AP Mode WDS Mode (Bridge /Repeater) AP Client Mode
	QOS	IEEE 802.1p /COS IEEE 801.11e WMM IEEE 802.11D Spanning Tree
	Management	Web-based administration Firmware upgrade by Web GUI Remote Link Test –Display connect statistics SNMP Traps to a list of IP number(Option) Event Log Support DHCP Client Support SNMP MIBII v2c/v3(Option) Support Telnet(Option) Command Line Interface (CLI) (Option) NTP Time synchronization Support Statistics on total transmission encountered and transmitting error occurred
	Hardware
	Base Platform	Ralink RT3052F
	Clock Speed	384MHz
	Reset Switch Built-in	Push-button momentary contact switch
	SDRAM	On board : 16 Mbytes
	Flash	On board : 4 Mbytes
	Interface	WAN: 10/100/1000BASE-TX auto-negotiation Ethernet port x 1 (RJ-45 connector) ; Auto MDI/MDI-X Support 48VDC IEEE 802.3af Active Power Over Ethernet X 1
	LED	1x LAN, 1x WLAN
	Environment	Operating Temperature:-20~50℃ Storage Temperature:-20~70℃ Humidity: 5%~90%(non condensing)
	Power Supply	Power Over Ethernet (48V/0.125 A) System Power Consumption: 4.5W
	Dimensions	125mm diameter x 64mm depth
	Weight	150g
	Certificate	FCC , CE